The TriCone Bit is the most versatile drill bit on the market. It is the go to drill bit in most styles of drilling. Whether you are drilling a water well or an oil well, Western Drilling Tools has the Tri Cone Drill Bit for you.
The Advantages of Using a Tri Cone Over Other Drill Bits:
1. There is a Tri Cone suitable for any rock formation
2. Tricone bit is versatile and can handle changing formations
3. Tri Cones are reasonably priced, long lasting and have an efficient drilling rate
Depending on your application, Western Drilling can provide you with new, re-run or premium oil field quality Tricone bits. The difference between a premium oil field Tricone bit and non-premium oil well quality Tricone is that the roller cones have high end sealed bearings; extremely high quality tungsten carbide and diamond gauge protection throughout the drill bit as well as skirt tail hard facing and optimized hydraulics. These roller cone drill bits are designed to go to extreme depths in extreme conditions and in situations where they cannot fail.
When ordering a bit the IADC bit classification system is a very useful tool and allows Western Drilling to specify a bit that out performs your expectations.
The TCI Tricone Bit ranges in size from 3.875" (88.9mm) to 28" (711.2mm)
The Mill Tooth TriCone Bit ranges in size from 5" (127mm to 32" (812.8mm)
IADC tricone rollercone classification system:
4 character code, first 3 characters are numbers, the last is a letter
1st number is the series. 1 to 3 represent a milled tooth tri cones, 4 - 8 represent TCI tri cones. The higher the series number the harder more abrasive the rock formation is.
2nd number is the relative degree of hardness within a series. The number ranges from 1 - 4, the higher the number the harder the formation
3rd number represents bearing design and gauge protection
1. Open bearing
2. Roller bearing air cooled
3. Open bearing gauge protected
4. Sealed roller bearing
5. Sealed roller bearing gauge protected
6. Sealed friction bearing
7. Sealed friction bearing gauge protected
4th character is a letter and describes optional features. There are 16 alphabetic character's, each representing the Tricones most significant feature.
The Advantages of Using a Tri Cone Over Other Drill Bits:
1. There is a Tri Cone suitable for any rock formation
2. Tricone bit is versatile and can handle changing formations
3. Tri Cones are reasonably priced, long lasting and have an efficient drilling rate
Depending on your application, Western Drilling can provide you with new, re-run or premium oil field quality Tricone bits. The difference between a premium oil field Tricone bit and non-premium oil well quality Tricone is that the roller cones have high end sealed bearings; extremely high quality tungsten carbide and diamond gauge protection throughout the drill bit as well as skirt tail hard facing and optimized hydraulics. These roller cone drill bits are designed to go to extreme depths in extreme conditions and in situations where they cannot fail.
When ordering a bit the IADC bit classification system is a very useful tool and allows Western Drilling to specify a bit that out performs your expectations.
The TCI Tricone Bit ranges in size from 3.875" (88.9mm) to 28" (711.2mm)
The Mill Tooth TriCone Bit ranges in size from 5" (127mm to 32" (812.8mm)
IADC CODE SELECTION | |||
IADC | WOB | RPM | Application |
(KN/mm) | (r/min) | ||
111/114/115 | 0.3-0.75 | 200-80 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk |
116/117 | 0.35-0.8 | 150-80 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk |
121 | 0.3-0.85 | 200-80 | soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone |
124/125 | 180-60 | ||
131 | 0.3-0.95 | 180-80 | soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds |
136/137 | 0.35-1.0 | 120-60 | |
211/241 | 0.3-0.95 | 180-80 | medium formations with high compressive strength, like medium, soft shake, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbeds. |
216/217 | 0.4-1.0 | 100-60 | |
246/247 | 0.4-1.0 | 80-50 | medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite |
321 | 0.4-1.0 | 150-70 | medium abrasive formations, like abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble |
324 | 0.4-1.0 | 120-50 | |
437/447/435 | 0.35-0.9 | 240-70 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk, gypsum, salt, soft limestone |
517/527/515 | 0.35-1.0 | 220-60 | soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone |
537/547/535 | 0.45-1.0 | 220-50 | soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds |
617/615 | 0.45-1.1 | 200-50 | medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite |
637/635 | 0.5-1.1 | 180-40 | hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble |
Note: Above limitts of WOB and RRPM should not be used simultaneously |
PIN SIZE | ||
Bit Diameter | API PIN | |
(inch) | (mm) | |
3 7/8''~5 1/4'' | 98~134 | 2 3/8''. 2 7/8'' |
5 5/8''~6 3/4'' | 143~171 | 3 1/2'' |
7 1/2''~9 1/2'' | 190.5~241 | 4 1/2'' |
9 5/8''~13 3/4'' | 245~350 | 6 5/8'' |
14 5/8''~26'' | 371~660.4 | 7 5/8'' |
IADC tricone rollercone classification system:
4 character code, first 3 characters are numbers, the last is a letter
1st number is the series. 1 to 3 represent a milled tooth tri cones, 4 - 8 represent TCI tri cones. The higher the series number the harder more abrasive the rock formation is.
2nd number is the relative degree of hardness within a series. The number ranges from 1 - 4, the higher the number the harder the formation
3rd number represents bearing design and gauge protection
1. Open bearing
2. Roller bearing air cooled
3. Open bearing gauge protected
4. Sealed roller bearing
5. Sealed roller bearing gauge protected
6. Sealed friction bearing
7. Sealed friction bearing gauge protected
4th character is a letter and describes optional features. There are 16 alphabetic character's, each representing the Tricones most significant feature.